loading page

EVALUATION OF THE SHEAR BOND STRENGTH OF BIODENTINE, PRE-MIXED NEOPUTTY AND NEW RESIN MODIFIED CALCIUM SILICA CEMENT WITH BULK FILL COMPOSITES; SCANNING ELECTRON MICROSCOPY-ENERGY DISTRIBUTED X-RAY SPECTROSCOPY ANALYSIS
  • +2
  • İrem İPEK,
  • Büşra KARAAĞAÇ ESKİBAĞLAR,
  • Şemsettin YILDIZ,
  • Osman ATAŞ,
  • Murat ÜNAL
İrem İPEK
Fırat University

Corresponding Author:[email protected]

Author Profile
Büşra KARAAĞAÇ ESKİBAĞLAR
Fırat University
Author Profile
Şemsettin YILDIZ
Fırat University
Author Profile
Osman ATAŞ
Fırat University
Author Profile
Murat ÜNAL
Sivas Cumhuriyet University
Author Profile

Abstract

The aim of this study was to evaluate the bond strength of three different calcium silicate based cements (Biodentine, NeoPutty and MTA Cem LC) with two different bulk fill composites (fiber-reinforced and non-fiber-reinforced). Plexiglas molds with a diameter of 4 mm and a thickness of 2 mm were prepared (n=60). Each CBC was mixed according to the manufacturer’s instructions and placed in plexiglass molds. The BD, NP, and MTA Cem LC samples were then randomly divided into 2 subgroups containing 10 samples each. The surfaces of the samples were air dried and Single Bond universal adhesive was applied. Then, cylindrical plastic capsules of 2 mm height and 2 mm inner diameter belonging to Filtek Bulk fill and EverX Posterior composite resin groups were centered on the coating material and polymerized for 20 seconds. After SBS testing, all samples were examined by scanning electron microscopy (SEM) to identify failure patterns. Three samples, one from each group, were prepared to evaluate the chemical compositions of the materials. Samples were prepared using plexiglass molds with a diameter of 10 mm and a thickness of 2 mm. The materials were then examined with an energy dispersive X-ray spectroscopy for surface elemental analysis. The values obtained from the tests were evaluated as statistically significant (p < 0.05). After SBS testing, the difference between all CBCs was statistically significant in both compound groups. According to the findings obtained from this study, it was concluded that MTA Cem LC had the highest SBS values in both composite groups.