The Ground Switcher
- Usama Thakur
Abstract
I propose a new semiconductor device capable of switching between ground
or resistance. I use 2 electrodes Anode and Gate respectively. The gate
is used to turn the component into a resistor, and without gate voltage,
it's a normal ground element. In this paper, we will look at the results
of the simulation obtained with Visual TCAD. Every circuit requires a
ground element and usually, it's used to complete the circuit, this
component acting as a resistor can save some electrons from grounding
and we will use these electrons to provide an alternate path so they can
flow through a different branch of the circuit this can save from power
loss and every little current can be used in some way.